I received a phone call about a building in Melbourne, Florida. The building maintenance engineer expressed concern for major leaks experienced in the main entrance of the building. I was told they think they had multiple problems that contributed to the leaks, but...
Case Studies
Case studies delves into a comprehensive analysis of a roofing project focused on identify the cause of roof system failures, maximizing energy efficiency, and ensuring long-lasting durability.
Topics
Recent Articles
Case Study: Hurricane Ida Storm Damage Moisture Mapping in Downtown New Orleans, Louisiana
Case Studies, Moisture Mapping, Storm Damage
The IR Aerials team was asked to immediately get our boots on the ground and drones in the air to start assessing property conditions after Hurricane Ida passed through. Our team has made multiple trips to Louisiana providing rapid response condition assessments and...
Case Study: 1.1 Million Square Foot Roof Maintenance Inspection in Ft. Worth, Texas
Case Studies, Maintenance Inspections
Most people probably have no idea what goes on behind the scenes to power and keep social media companies moving forward and operational. Facebook is one of the largest social media platforms today and with as much data as they push every day, you better believe they...
Case Study: Drone Thermal Scan TPO Roof in Coral Springs, Florida
Thermal imaging is one step in the process of inspecting and understanding the condition of a roof. The concept is simple in the sense that we are only identifying where we suspect moisture to be. Once the anomalies are identified and highlighted, the physical...
Case Study: Infrared Thermographic Inspection of a Commercial Mod Bit Roof in Jacksonville, Florida
Case Studies, Maintenance Inspections
For this project, we were contracted by a Tallahassee-based roofing and solar company to complete a commercial roof inspection. The property owner wanted to have solar panels installed, but they needed to first get a roof inspection done to make sure that there were...
Case Study: Two Thermal Roof Inspections Help Process Insurance Claims in Hallandale, Florida
Case Studies, Insurance Claims, Moisture Mapping, Storm Damage
Every day, your exterior walls and roof (the building envelope) take a beating from the sun, wind, rain, and whatever else mother nature decides to throw its way. These structures ensure that your employees and your business can continue to operate safely and...
Case Study: TPO Thermal Roof Inspection in Tampa, Florida
Case Studies, Maintenance Inspections
This facility is a small smoked meats processing company that supplies grocery stores and restaurants throughout the country and is based right here in the Tampa Bay area. Like all food processing facilities, they follow strict guidelines to maintain a safe and...
Infrared Thermographic Roof Inspection for a Large Commercial Building – Wichita Falls, TX
Case Studies, Insurance Claims, Moisture Mapping
Oftentimes, we are asked to conduct inspections of commercial roofs to detect internal moisture damage when an insurance claim needs to be processed. Whether we are representing an insurance carrier or a policyholder, we always work hard to provide the highest-quality...
Thermal Scan for a 650,000 Sq. Ft. Commercial Roof – Chester, SC
Case Studies, Maintenance Inspections, Moisture Mapping
For this case study, we worked alongside a Fort Lauderdale-based commercial roofing contractor that specializes in repairing and replaces large commercial roofs. The roof that we inspected was a nearly 6,500 square manufacturing facility in Chester, SC. The known...
Case Study: Dallas North Tollway Thermal Bridge Inspection
Case Studies, Maintenance Inspections
Hundreds of thousands of people travel on the Dallas North Tollway on a daily basis, and they pay for it. The drivers hope to experience a faster commute time and better traffic and expect the roadway to be properly maintained and fully operational. Bridge structures...
Drone Structural Inspection of Bridge Bearing Pads—Dallas Texas
Case Studies, Maintenance Inspections
The maintenance engineering team of the LBJ Expressway reached out to us because they needed to inspect the bearing pads of some of their bridges. However, the traditional way of inspecting them using a snooper truck would be expensive and hard to schedule. In their...
Case Study: Apartment Complex Roof Moisture Mapping – Austin, TX
Case Studies, Moisture Mapping
This roof is an apartment complex located just off the river near Downtown Austin, TX. The engineer/ consulting firm involved with the project completed an initial condition assessment of the roof and determined the owner could benefit from having a moisture mapping...
Tornado-Damaged TPO Roof IR Scan-Arlington, TX
Case Studies, Insurance Claims, Moisture Mapping, Storm Damage
In November of 2020, the Arlington area experienced a tornado that caused damage to homes and buildings. We were brought in by a Dallas-based engineering firm representing the insurance carrier to perform a moisture survey on the two buildings that were claimed to be...
Topics
Recent Articles

Master the Right Tools & Methods: A Guide to Low-Slope Roof Moisture & Leak Detection Testing
Commercial roofs, with their various forms and constructions, play a critical role in safeguarding buildings from the elements. However, over time, moisture can silently undermine their integrity. To mitigate this risk, we rely on specific tools to detect moisture. In...

Protecting Commercial Roofs with Moisture Mapping
Moisture mapping is a precise process that involves various techniques, tools, and validation methods to detect and confirm water damage. The resulting moisture map provides a highly accurate visual representation of moisture locations on your roof. These areas can be...

Say “YES” to More Roofing Jobs Even During Worker Shortages
Strategies to Overcome Worker Scarcity and Optimize Roofing Operations Roofing worker shortages have been a challenge for quite some time and according to current research, there's no end in sight. The impact of this labor shortage forces roofing contractors to...