Rapid Roof Scans & Moisture Assessments When Time Matters

An example of Structura View's building enclosure consulting technology.
Topics for this article: Case Studies, Education

Client Challenge

The roofing contractor was tasked with assessing the roof and repairing several leaky areas within a tight budget and short timeframe.

Assessment & Results

The solution for this client used an expedited roof inspection and leak detection process. We began by taking a series of high-resolution aerial images at different angles along with a visual mapping of the entire roof system, stitched together into a single large image, all delivered later in the day.

After the aerial imaging, we went on-roof where we took photographic documentation of membrane failures, cracks, and other signs of damage.

Next, we conducted impedance testing and marked the roof with high-visibility paint where moisture intrusion is suspected. This creates moisture maps that support budgeting and repair decisions.

After the impedance testing, we took core samples to help validate moisture areas and assumptions derived from the other testing methods. Each core sample is photographed, documenting the core sample location and moisture readings taken from each layer of the roofing system.

All inspection images and moisture maps were delivered to the client in the afternoon, just hours after the inspection was completed.

Example Images

To provide a clearer picture of our process and results, we’ve included example images from the inspection. These images showcase the high-resolution photographic documentation and the on-roof painted moisture map.

Take a look to see how this expedited roof inspection and leak detection process works in practice.

Moisture Map

Painted outlines where suspected moisture areas were observed.

High-Visibility On-Roof Painted Moisture Map, Image Taken by Structura View.

Marked Problem Areas

Areas painted on the roof indicate observed failures.

Wet Area Marked with High-Visibility Paint, Image Taken by Structura View.

On-Roof Images

Image documentation of details such as membrane conditions, cracks, and suspected failures.

Cracks & Mold, Image Taken by Structura View.

Membrane Failure

On-Roof Image Documentation of Damaged Membrane, Image Taken by Structura View.

Overview Images

Overview aerial images documenting the roof’s condition.

Example of Image Overview, Image Taken by Structura View.

RWS Point Data

Provides moisture data readings of tested areas.

Image Documentation of RWS Scan Point, Image Taken by Structura View.

Stitched Top-Down Visual Image

Presents a comprehensive, orthographic view of your entire roof.

Close-Up of Orthographic Photo, Image Taken by Structura View.

This case study highlights how our expedited roof inspection helped a roofing contractor make a timely assessment within a tight budget and short timeframe. By delivering high-resolution image documentation and on-roof moisture maps, the contractor was able to provide a rapid turnaround for their client.

Topics

Recent Articles

Post-Storm Action Tip: Conduct a Roof Inspection

Post-Storm Action Tip: Conduct a Roof Inspection

After a storm, offer your clients prompt roof inspections to evaluate damage and identify any safety concerns. A detailed report will guide them through necessary repairs and prevent further issues.

Approaching Storm Readiness Tip: Last-Minute Roof Check

Approaching Storm Readiness Tip: Last-Minute Roof Check

Help your clients perform a final inspection of vulnerable areas on their roof, including edges, corners, seams, and flashing. Offer an emergency pre-storm inspection service to ensure everything is secure and ready for the storm.

Storm Preparation Tip: Review Insurance Coverage

Storm Preparation Tip: Review Insurance Coverage

Advise clients to regularly review their insurance policies to ensure full coverage. Offer a service to assess their roof’s condition as part of the insurance review, helping identify any weak points that could lead to denied claims.

Ready to work with
Structura View?